Find Aluminum Tube, Aluminum Flat Tube, Aluminum Finned Tube on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Aluminum Tube > 3003 / 3102 Micro Multiport Flat Aluminum Tubing Extrusion for Heat Exchangers

3003 / 3102 Micro Multiport Flat Aluminum Tubing Extrusion for Heat Exchangers

Basic Info

Model No.:  3003, 3102

Product Description

Model NO.: 3003, 3102 Surface Treatment: Mill Finished Alloy: Alloy Trademark: Trumony Origin: Jiangsu Shape: Tube Grade: 3000 Series Temper: O - H112 Specification: According to the customer request HS Code: 7608209910 3003 / 3102 Micro-multiport Flat Extrusion Aluminum Tube
 
Product Introduction:
Micro Multiport Extruded Aluminium Tube,is a kind of thin porous flat tubular material,which is treated by surface spraying zinc,using refining aluminum bar by hot extrusion.It is mainly used for the production of heat exchangers. Due to its high corrosion-resistance and good heat conductivity, MPE tube is particularly well suited for the use in evaporators and condensers.
 
Commonly used material chemical composition
No. Alloy Si Fe Cu Mn Mg Cr Zn V Ti
1 1050 ≤0.25 ≤0.40 ≤0.05 ≤0.05 ≤0.05 --- ≤0.05 ≤0.05 ≤0.03
2 1100 ≤0.95(Si+Fe) 0.05-0.20 ≤0.05 --- --- ≤0.10 --- ---
3 3102 ≤0.40 ≤0.70 ≤0.10 0.05-0.40 --- --- ≤0.30 --- ≤0.10
4 3003 ≤0.15 ≤0.15 ≤0.01 0.90-1.10 ≤0.03 ≤0.03 ≤0.05 ≤0.05 ≤0.05
 
Supply state and mechanical properties
Alloy Temper Tensile Strength Yield Strength Elongation
1050 O/F/H111/H112 ≥65MPa ≥20MPa ≥25%
1100 O/F/H111/H112 ≥75MPa ≥20MPa ≥25%
3102 O/F/H111/H112 ≥75MPa ≥20MPa ≥25%
3003 O/F/H111/H112 ≥75MPa ≥20MPa ≥25%
 
The corrosion resistance performance
Salt spray test ≥750hours
 
The pressure resistance performance
Automobile Condensers Household Condensers Evaporators
≥9MPa ≥13.5 MPa ≥3.5 MPa
 
Multiport Extruded Aluminum Tube(MPE)- which is used for automobile air conditioner condenser has larger internal section area, better effectiveness for heat transfer. At the same time, has the following characteristics:
1. Low weight
2. Good thermal and electricity conductivity
3. Excellent corrosion resistance
4. High cycle reuse value
5. High surface quality
6. Narrow tolerance range
 
Beside increased global performances, an all-aluminium brazed heat exchanger using MPE will also present better corrosion resistance. MPEs are primarily used for the following applications:
Condensers
Evaporators
Oil coolers
Radiators
Heater cores  

 
Package: In coil or Straight with fixed length.
Surface Treatment : With Zinc spraying or without Zinc spraying.

Contact us if you need more details on Aluminum Tube. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Tubo Aluminio、Aluminum Flat Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aluminum Tube

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters