POM Rod /Polyacetal Rod for Plastic Gears
Product Description
POM Rod/Delrin Rod/Polyacetal Rod for Plastic Gears
POM is a kind of engineering plastic with good mechanical properties. POM together with UHMW PE, Nylon, PTFE are known as four most abrasion resistant plastics. It has almost the same rigidity as metal, so it's an ideal replacement material of copper, cast zinc, steel, aluminum and other metal materials. We are able to produce POM products without bubbles or cracks.
Photo
Characteristics
-High surface hardness
-Good wear resistance
-Excellent machinability
-Nice self-lubricating properties
-Good dimensional stability
-Low water absorption
-Oil resistant
-Work under the temperature of -40-100 centidegrees
Applocation
Bearings
POM bearings own excellent stability and good wear resistance in various kinds of moist environments.
Gears
POM has high stiffness and rigidity, good self-lubricating properties. So it has taken the place of metal gears in many applications. (Prior materials: Bronze, Stainless Steel)
Rollers
Guide rollers machined from POM rod operate smoothly and reliably in lift gate systems used to load cargo onto truck beds. (Prior materials: Cast Iron, Cast Aluminium)
Structural Keels
With excellent fatigue and impact resistance, POM is a suitable material of continuously loaded structural keel for prosthetic device. (Prior materials: Nylon, PU)
Slide Blocks
Low coefficient friction, wear resistant, self-lubricating, no need for lubricating oil.
Main Properties
PROPERTIES | Test Method | Unit | Value |
I.Physical Properties | |||
Density | ISO 1183 | g/cm3 | 1.45 |
Water absorption 24hrs | ISO 62 | % | < 0.3 |
II.Thermal Properties | |||
Heat deflection temperature - HDT/A | ISO 75A | ºC | 110 |
Min. service temperature |
| ºC | -40 |
Max. service temperature |
| ºC | 100 |
Thermal conductivity at 23 ºC | DIN 11359 | W/(K*m) | 0.31 |
Coefficient of linear thermal expansion | ISO 11359 | 10-4*K-1 | 1.2 |
Flammability Rating(6mm thickness) | UL 94 | - | HB |
III.Mechanical Properties at 23ºC | |||
Tensile strength at yield | ISO 527-2 | MPa | 63 |
Tensile strength at break | ISO 527-2 | Mpa | - |
Elongation at break | ISO 527-2 | % | 31 |
Modulus of elasticity after tensile test | ISO 527-2 | MPa | 2,700 |
Modulus of elasticity after flexural test | ISO 178 | MPa | - |
Hardness - Shore D | DIN 53505 |
| 83 |
Charpy impact strength | ISO 179 | kJ/m2 | N. B. |
Friction coefficient | DIN 53375 |
| 0.35 |
IV.Electrical Properties at 23ºC | |||
Dielectric constant at 1 MHz | IEC 60250 | 106Hz | 3.8 |
Dielectric loss factor at 1 MHz | IEC 60250 | 106Hz | 0.005 |
Volume resistively | IEC 60093 | Ohm (Ω) * cm | >1013 |
Surface resisively | IEC 60093 | Ohm (Ω) | >1013 |
Dielectric strength | IEC 60243-1 | kV/mm | 40 |
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |
Our Service
1)Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2)Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3)General samples time can be arranged within 2--5days.
4)Orders will be produced exactly as request and approved samples.
5)When mass production,we send photos to show the production line.And confirm the estimate time again.
6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7)Before shipment,our QC will have inspection to make sure the quality.
8)We always try best to ensure every order to delivery in time.
Payment Terms
1)T/T,Cash,L/C.
2)30% deposit,70% balance before shipment.
3)Lead time: 15 days after received deposited for 2tons.
4)Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.
Packing & Delivery
For sample: By EMS,DHL,UPS,TNT,FedEx
around 5--7 working days to arrive
For Bulk order:
1.Qty of 2tons,within 15 days.
2.Via Sea
3.Delivery time:we will finish production in 15days for 2tons.
4.For 20 GP,may nee around 30days.
Our Company
About us:
Zhenjiang Chunhuan Sealing Material Co., Ltd is located in Yangzhong City Jiangsu Province who is a director member of China Plastic Association fluorine plastic processing Specialized Committee.Chunhuan was founded in 1985, our group has now emerged as one of the large-scaled backbone enterprises in the field of PTFE in China after 30-plus years of constant development.
Zhenjiang Chunhuan Sealing Material Co., Ltd is one of the fluoroplastics processing enterprises taking the lead in passing the IS09001 quality system certification. And with the strength of PTFE products, which are superior quality with FDA,REACH,RoHS,MSDS certificate.
Our group mainly manufactures products: PTFE rod, PTFE film, pipes, sheets & mats, PTFE push rods & extrude rods, PTFE turning plates & teflon film , PTFE fillings, PTFE belts, ropes, tapes & packing tapes, metallic gaskets, PTFE corrosion resistant linings, composited tubes & pipe fittings, rubber sheets, mats, framework oil seals & o-rings.
All people from Chunhuan Brand group will continue to bring the best and most considerate service to all of our devoted old customers; meanwhile we sincerely hope that we will extend our service to more new customers.
Contact us if you need more details on POM White Rod. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Delrin Black Rod、Polyacetal Rod For Plastic Gears. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Engineering Plastics Products