Aluminum Microchannel Parallel Flow Flat Tube

Model NO.: 3003/3102/1050/1100 Surface Treatment: Mill Finish Alloy: Alloy Length: 200-4000mm Thickness: 1-4mm Type: Aluminum Tube Technique: Extruded Specification: as per customer′s requirement Shape: Flat Grade: 3000 Series Temper: O - H112 Width: 8-60mm Wall Thickness: 0.15-0.6mm Application: Evaporators and Condensers Trademark: Trumony Origin: China Basic Info.
Export Markets: Global
Product Description
Micro-multiport tube is the high-tech aluminum products under the process of hot extrusion from refined aluminum ingot and then zinc spraying for anti-corrosion.

Micro multi-port tube is the core materials of new generation parallel flow air conditioning heat exchangers. It is outstanding in enviromental-friendly, efficient, energy-saving and cost reduction and was approved vividly in automobile air conditioning system. With restriction and prohibition of the application of the traditional refrigerant, it is a trend that household and commerical air conditioning heat exchanger needs revolution.

Micro multi-port tube is widely used in automotive air conditioning condensers,evaporators,home air conditioners,commercial air conditioners and air to water heat exchanger systems,energy saving,environmental protection,reduced efficiency of the four major advantages.

				Technical Standards
1. Chemical Composition
No.	Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	V	Ti
1	1050	≤ 0.25	≤ 0.40	≤ 0.05	≤ 0.05	≤ 0.05	-	≤ 0.05	≤ 0.05	≤ 0.03
2	1100	≤ 0.95(Fe+Si)		0.05-0.20	≤ 0.05	-	-	≤ 0.10	-	-
3	1197	≤ 0.15	≤ 0.20	0.40-0.55	0.10-0.20	≤ 0.03	≤ 0.05	≤ 0.05	≤ 0.05	≤ 0.05
4	3102	≤ 0.40	≤ 0.70	≤ 0.10	0.05-0.40	-	-	≤ 0.30	-	≤ 0.10
5	3R03	≤ 0.15	≤ 0.15	≤ 0.01	0.90-1.10	≤ 0.03	≤ 0.03	≤ 0.05	≤ 0.05	≤ 0.05
2. Mechanical Properties
No.	Alloy	Temper	Tensile Strength(Mpa)	Yield Strength(Mpa)	Elogation(%)
1	1050	O/F/H111/H112	≥ 65	≥ 20	≥ 25
2	1100	O/F/H111/H112	≥ 75	≥ 20	≥ 25
3	1197	O/F/H111/H112	≥ 80	≥ 25	≥ 20
4	3102	O/F/H111/H112	≥ 75	≥ 20	≥ 25
5	3R03	O/F/H111/H112	≥ 80	≥ 25	≥ 20
3. Size Tolerance
Width	Thickness	Wall Thickness	Length	Lateral Curvature	Frontal Curvature	Twsiting Dgree
± 0.05mm	± 0.03mm	± 0.05mm	± 0.03mm	≤ L× 0.2%	≤ L× 0.25%	≤ L× 0.15%
4. Corrosion Resistance			Salt spray test: ≥ 750 hours
5. Zn Coating Standards			6/8/10/13± 2g/square meter
6. Flux Cotaing Standards			10-15± 2g/square meter

Contact us if you need more details on Micro-Multiport Tube. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminum Tube、Condenser Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Extrusion&Casting Industrial Material